4.8/5 (2.4k+ customer ratings)

DIY Oil Changes, Without the Mess.

⚡ OIL CHANGE SEASON SALE
12V / 80W electric oil extractor pump
Built-in switch and overload protection
Complete kit: 2 hoses and 2 clamps
30-Day Satisfaction Guarantee • Free US Shipping
Free US Shipping • 30-Day Satisfaction Guarantee
12V / 80W • Built-In Power Switch
1-Pump, 2-Pump & 3-Pump Options
Free US Shipping • 30-Day Satisfaction Guarantee
12V / 80W • Built-In Power Switch
1-Pump, 2-Pump & 3-Pump Options
Free US Shipping • 30-Day Satisfaction Guarantee
12V / 80W • Built-In Power Switch
1-Pump, 2-Pump & 3-Pump Options
Free US Shipping • 30-Day Satisfaction Guarantee
12V / 80W • Built-In Power Switch
1-Pump, 2-Pump & 3-Pump Options

Oil Changes Made Simple at Home

Three straightforward steps for compatible vehicles and equipment.

1. Fit the Hoses Securely

1. Fit the Hoses Securely

Attach the inlet and outlet hoses to the correct ports, then tighten both hose clamps. Insert the inlet into a compatible dipstick tube and route the outlet into a waste-oil container.

2. Connect to 12V Power

2. Connect to 12V Power

Connect the battery leads to an appropriate 12V battery: red to positive, black to negative. Keep the pump steady and check all connections before switching it on.

3. Switch On & Transfer

3. Switch On & Transfer

Press the built-in power switch to extract used oil. Monitor the flow and collection container; switch off when finished. Follow the 30-minute duty-cycle limit.

1. Fit the Hoses Securely

1. Fit the Hoses Securely

Attach the inlet and outlet hoses to the correct ports, then tighten both hose clamps. Insert the inlet into a compatible dipstick tube and route the outlet into a waste-oil container.

2. Connect to 12V Power

2. Connect to 12V Power

Connect the battery leads to an appropriate 12V battery: red to positive, black to negative. Keep the pump steady and check all connections before switching it on.

3. Switch On & Transfer

3. Switch On & Transfer

Press the built-in power switch to extract used oil. Monitor the flow and collection container; switch off when finished. Follow the 30-minute duty-cycle limit.

Meet the Freljord Co Oil Extractor

12V-powered oil transfer for compatible vehicles, equipment, and workshop projects.

Meet the Freljord Co Oil Extractor

12V-powered oil transfer for compatible vehicles, equipment, and workshop projects.

0V

DC operation powered by a 12V battery

0W

Electric motor with overload protection

0 min

Maximum continuous-duty cycle listed on the pump

Specs listed on the product page: 6.7A current, 0.13 GPM rated flow, plastic housing. Actual performance depends on oil temperature, viscosity and setup. Never use with gasoline or water.

Oil Changes, Your Way

Compare the Freljord Co 12V extractor with the traditional drain-plug method. An extractor suits compatible engines with dipstick-tube access; some vehicles still require conventional draining.

Oil Changes, Your Way

Compare the Freljord Co 12V extractor with the traditional drain-plug method. An extractor suits compatible engines with dipstick-tube access; some vehicles still require conventional draining.

Freljord Co Oil Extractor
Traditional Drain-Plug Method
Extracts through dipstick tube
Powered by a 12V battery
Built-in on/off switch
Hoses and clamps included
Needs drain-plug access for oil removal
Can remove engine oil

A Complete Oil-Extraction Kit, Ready for Your Garage.

The Freljord Co 12V Oil Extractor Pump is designed to transfer used oil through the dipstick opening on compatible engines, helping you avoid reaching the drain plug for oil removal. Its 80W motor features a built-in power switch and overcurrent protection for thick or cold oil. Use it for suitable engine, gear/differential and lubricating oils; the product-page FAQ also lists diesel fuel, transmission and hydraulic fluids. Do not use with water or gasoline.

In the kit: 1 pump, 1 inlet hose (6mm × 1200mm), 1 outlet hose (12mm × 1500mm) and 2 hose clamps. Key specs: 12V DC, 80W, 6.7A, 0.13 GPM rated flow and a 30-minute continuous-duty limit. Always check your engine’s dipstick-tube access and hose fit before ordering.

  • 12V DC / 80W motor
  • Built-in power switch & protection
  • 6mm inlet hose (1.2m)
  • 12mm outlet hose (1.5m)
  • Includes two hose clamps
  • Engine, gear & lubricating oil

What Customers Are Saying

Excellent 4.8/5 | 2.4k+ reviews

Shop With Confidence

Ships in 24–48 Hours

Orders are processed within 24–48 hours, with tracking provided as available.

Protected Delivery

Every package ships securely with protection for loss or damage.

30-Day Satisfaction Guarantee

If it's not right for you, send it back within 30 days.

Free US Shipping

Free US shipping; standard delivery is estimated at 4–7 business days.